
F3S-TGR-CL
Multi-beam, finger and hand protection safety sensor with the same design and functionalities
The F3S-TGR-CL safety sensor family is simple to wire, mount and configure since all models in finger, hand and body protection in type 2 and type 4 are designed in the same way and providing the same set of user selectable functions.
- Family concept in wiring and mounting for total consistency in every application
- No need for external devices by integrated safety control functions selectable via built-in dip-switches
- All models with external device monitoring, interlock function, range setting (short and long range) and optical or wired coding selection
- Advanced models include pre-reset, muting and blanking function and cyclic operation
- Muting lamp integrated for advanced models
- Type 2 according to EN61496-1 and PL c according to EN ISO 13849-1
- Type 4 according to EN61496-1 and PL e according to EN ISO 13849-1
Specifications & ordering info
Ordering information
Multi-beam safety sensors
F3S-TGR-CL2_-K_ (Type 2)
Basic feature set1 |
Advanced feature set2 |
|||
---|---|---|---|---|
F3S-TGR-CL4_-K_ (Type 4)
Basic feature set1 |
Advanced feature set2 |
|||
---|---|---|---|---|
Safety sensors
F3S-TGR-CL2_ (Type 2)
Basic1 |
150 mm to 2,400 mm3 |
||||
Advanced2 |
|||||
150 mm to 2,250 mm3 |
|||||
F3S-TGR-CL4_ (Type 4)
Basic3 |
150 mm to 2,400 mm3 |
||||
Advanced4 |
|||||
Master4 |
150 mm to 2,250 mm5 |
||||
Slave6 |
|||||
F3S-TGR-CL-_-_M/S Master-Slave Series
- A Master-Slave cascade system is made of one master segment and one slave segment.
- The length of the total protective field can vary from minimum 300 mm till maximum 2,400 mm.
- The interconnect cable length limitation between master and slave segment is in total max. 0,9 m.
Possible combinations of master and slave are in this table:
Accessories
Receiver cables (M12-8pin, shielded, flying leads)
![]() |
Sensor connector with open cable end M12-8pin, outer shielding layer |
||
Transmitter cables (M12-4pin, shielded, flying leads)
![]() |
Sensor connector with open cable end M12-4pin, outer shielding layer |
||
Mounting brackets
![]() |
F39-TGR-ST-SB7 |
||
![]() |
Master-Slave accessories
![]() |
Male-male extension connector M12-8pin, outer shielding layer |
||
![]() |
Laser alignment kit
![]() |
Mounting systems and mirrors
Adjustable stands
Mirror system for multi-beam safety sensors (F3S-TGR-CL_-K_)
Muting accessories
Cable cover
Specifications
Multi-beam safety sensors
Finger- and hand safety protection sensors
F3S-TGR-CL and G9SB-301-D in manual reset

How can we help you?
If you have a question or would like to ask for a quote, please contact us or send a request.
Ota minuun yhteyttä F3S-TGR-CL

Kiitos yhteydenotostasi. Otamme teihin yhteyttä mahdollisimman pian.
Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.
DownloadTarjous F3S-TGR-CL
Tällä lomakkeella voit pyytää tarjouksen valitsemastasi tuotteesta. Täytäthän kaikki *-merkityt kentät. Henkilökohtaisia tietojasi käsitellään luottamuksellisesti.

Kiitos tarjouspyynnöstä. Toimitamme tarvittavat tiedot teille mahdollisimman pian.
Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.
Download