Login

Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

Download

Register

Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

Download

Thank you for registering

An email to complete your account has been sent to

Return to the website

get direct access

Fill in your details below and get direct access to content on this page

Text error notification

Text error notification

Checkbox error notification

Checkbox error notification

Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

Download

Thank you for your interest

You now have access to NX-TC

A confirmation email has been sent to

Continue to page

Please or get direct access to download this document

NX-TC

NX-TC

Next generation of controllers

NX-TC is the next generation controllers designed to achieve optimal and automatic temperature control without human intervention. In fact from now on all typical adjustments made in field by expert are now automated using Artificial Intelligence A.I.

  • Adaptive control for self-optimization of control setting due to process changes
  • Specialized function for better sealing application (packaging) and for water-cooled extruders (plastic)
  • Easier integration thanks to ProfiNet, Ethernet-IP and EtherCAT fieldbus support

Specifications & ordering info

Ordering information

International Standards

The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus,
UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, CE: EU Directives, RCM: Regulatory Compliance Mark, KC: KC Registration, and EAC: EAC Mark.

Contact your OMRON representative for further details and applicable conditions for these standards.

Temperature Control Units

Unit type

Product name

Specification

Standards

Order code

Number of channels

Input type

Output

Output capacity

CT Input capacity

Control type

Conversion time

I/O refreshing method

NX Series Temperature
Control Unit

Temperature Control Unit

2Ch type

 

2 Ch

Multi-input

(Thermocouple and Resistance

thermometer)

Voltage output

(for driving SSR)

2 points

2 points

Standard Control

50 m sec

Free-Run refreshing

UC1, CE, RCM, KC, EAC

NX-TC2405

None

Standard Control

NX-TC2406

Voltage output

(for driving SSR)

4 points

None

Heating and Cooling Control

NX-TC2407

Linear current output

2 points

None

Standard Control

NX-TC2408

Temperature Control Unit

4Ch type

 

4 Ch

Voltage output

(for driving SSR)

4 points

4 points

Standard Control

NX-TC3405

None

Standard Control

NX-TC3406

Voltage output

(for driving SSR)

8 points

None

Heating and Cooling Control

NX-TC3407

Linear current output

4 points

None

Standard Control

NX-TC3408

Specifications

Item

Specification

Enclosure

Mounted in a panel

Grounding method

Ground to 100 Ω or less

Operating environment

Ambient operating temperature

0 to 55°C

Ambient operating humidity

10% to 95% RH (with no condensation or icing)

Atmosphere

Must be free from corrosive gases.

Ambient storage temperature

−25 to 70°C (with no condensation or icing)

Altitude

2,000 m max.

Pollution degree

Pollution degree 2 or less: Conforms to JIS B 3502 and IEC 61131-2.

Noise immunity

Conforms to IEC 61000-4-4, 2 kV (power supply line)

Overvoltage category

Category II: Conforms to JIS B 3502 and IEC 61131-2.

EMC immunity level

Zone B

Vibration resistance

Conforms to IEC 60068-2-6.

5 to 8.4 Hz with amplitude of 3.5 mm,

8.4 to 150 Hz, acceleration of 9.8 m/s2

100 min each in X, Y, and Z directions (10 sweeps of 10 min each = 100 min total)

Shock resistance

Conforms to IEC 60068-2-27. 147 m/s 2 , 3 times each in X, Y, and Z directions

Insulation resistance

20 MΩ min. between isolated circuits (at 100 VDC)

Dielectric strength

510 VAC between isolated circuits for 1 minute at a leakage current of 5 mA max.

Applicable standards1

cULus: Listed (UL 61010-2-201), ANSI/ISA 12.12.01,

EU: EN 61131-2, RCM, KC: KC Registration, EAC

 


1. Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model.

1. Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model.

How can we help you?

If you have a question or would like to ask for a quote, please contact us or send a request.

0207 464 200
Contact us

Ota minuun yhteyttä NX-TC

nx in-panel tc prod

Täytäthän kaikki *-merkityt kentät. Henkilökohtaisia tietojasi käsitellään luottamuksellisesti.

Text error notification

Text error notification

Text error notification

Text error notification

Country error notification

Text area error notification

Checkbox error notification

Checkbox error notification

Kiitos yhteydenotostasi. Otamme teihin yhteyttä mahdollisimman pian.

Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

Download
0207 464 200
0207 464 200
Request quotation
Request quotation

Tarjous NX-TC

Tällä lomakkeella voit pyytää tarjouksen valitsemastasi tuotteesta. Täytäthän kaikki *-merkityt kentät. Henkilökohtaisia tietojasi käsitellään luottamuksellisesti.

nx in-panel tc prod

Henkilökohtaiset tiedot

NX-TC

Text error notification

Text error notification

Text error notification

Text error notification

Country error notification

Tarjouksen yksityiskohdat

Select notification error

Select notification error

Text area error notification

Checkbox error notification

Checkbox error notification

Kiitos tarjouspyynnöstä. Toimitamme tarvittavat tiedot teille mahdollisimman pian.

Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

Download
Request quotation
Request quotation

Features

Minimize scrap by exact control of seal-jaw temperature in horizontal/vertical flow wrappers machines

E5_D TC: Perfect sealing temperature control for packaging machines (1)
  • E5_D TC: Perfect sealing temperature control for packaging machines (1)

    E5_D TC: Perfect sealing temperature control for packaging machines (1)

    On a conventional sealing machine temperature sensors can often be located too far away from the sealing surface of the heating bar. This causes a difference between the temperature of the sealing surface and the temperature that was actually being controlled. This temperature difference and resulting sealing failures, increase as the packaging speed increases and also in correlation with thinner packaging materials or changing in ambient temperature. Thanks to the E5_D series, this issue is solved with the following approach: • bringing sensor closer to the sealing surface - thanks to special temperature sensor models for faster detection • adopting special algorithms (automatic filter adjustment function) built-in E5_D, specifically developed to suppress temperature variations. The result is a better sealing quality of the packages.

    01:25

On a conventional sealing machine temperature sensors can often be located too far away from the sealing surface of the heating bar. This causes a difference between the temperature of the sealing surface and the temperature that was actually being controlled. This temperature difference and resulting sealing failures, increase as the packaging speed increases and also in correlation with thinner packaging materials or changing in ambient temperature. 

Thanks to the NX-TC series, this issue is solved with the following approach: 

  • bringing sensor closer to the sealing surface - thanks to special temperature sensor models for faster detection

E5_D: Perfect sealing temperature control for packaging machines (2)
  • E5_D: Perfect sealing temperature control for packaging machines (2)

    E5_D: Perfect sealing temperature control for packaging machines (2)

    On a conventional sealing machine temperature sensors can often be located too far away from the sealing surface of the heating bar. This causes a difference between the temperature of the sealing surface and the temperature that was actually being controlled. This temperature difference and resulting sealing failures, increase as the packaging speed increases and also in correlation with thinner packaging materials or changing in ambient temperature. Thanks to the E5_D series, this issue is solved with the following approach: • bringing sensor closer to the sealing surface - thanks to special temperature sensor models for faster detection • adopting special algorithms (automatic filter adjustment function) built-in E5_D, specifically developed to suppress temperature variations. The result is a better sealing quality of the packages.

    01:03

  • adopting special algorithms (automatic filter adjustment function) built-in NX-TC, specifically developed to suppress temperature variations. The result is a better sealing quality of the packages.

Fieldtest AI temperature controller e5-d
  • Fieldtest AI temperature controller e5-d

    Fieldtest AI temperature controller e5-d

    See the AI temperature controller in action. E5_D is the next generation controllers designed to achieve optimal and automatic temperature control without human intervention. All typical adjustments are now automated using Artificial Intelligence A.I.

    01:02

See the AI temperature controller in action on the below field-test/proof movie and find out how we can control real-sealing jaw surface temperature with no impact on PID control performance.

Increase production by keeping the temperature steady - even when the packaging machine starts

OMRON NX-TC pre-boost function
  • OMRON NX-TC pre-boost function

    OMRON NX-TC pre-boost function

    Increase production by keeping the temperature steady - even when the packaging machine starts! A common challenge in horizontal/vertical flow wrapper machines. During the operation, the film absorbs heat from the seal-jaw -causing its temperature to drop at each seal. Prevent this fluctuation by synching the temperature of sealing with machine motion and activate pre-boost function with OMRON's temperature control unit NX-TC equipped with perfect sealing algorithms based on AI.

    02:48

That’s a common challenge in horizontal/vertical flow wrapper machines. During the operation, the film absorbs heat from the seal-jaw -causing its temperature to drop at each seal.

Prevent this fluctuation by synching the temperature of sealing with machine motion.

Adaptive control algorithm

E5_D Temperature contoller: Adaptive control algorithm
  • E5_D Temperature contoller: Adaptive control algorithm

    E5_D Temperature contoller: Adaptive control algorithm

    With standard temperature controllers, not only do you need a long time to define initial start-up PID settings, but it is also really challenging to make the optimal adjustments without having many years of experience in this area. That’s why Omron developed the E5_D Series with “adaptive control technology”. This automatically detects changes in the process under control and adapts the PID accordingly.

    01:26

With standard temperature controllers, not only do you need a long time to define initial start-up PID settings, but it is also really challenging to make the optimal adjustments without having many years of experience in this area. That’s why Omron developed the NX-TC Series with “adaptive control technology”. This automatically detects changes in the process under control and adapts the PID accordingly.

Water cooling output adjustment

E5_D TC: Temperature variations in molding machines minimized by a new algorithm
  • E5_D TC: Temperature variations in molding machines minimized by a new algorithm

    E5_D TC: Temperature variations in molding machines minimized by a new algorithm

    On a water-cooled extrusion molding machine, increased speed leads to temperature variations due to various factors such as the materials compounding and cooling water…For human operator that means repeatedly make valve adjustments to stabilize the quality. However It is really difficult to achieve high speed production while also maintaining the quality… With the E5_D, the water-cooling output adjustment function suppresses the temperature variations to a minimum and raises the production capacity with the quality maintained

    01:33

On a water-cooled extrusion molding machine, increased speed leads to temperature variations due to various factors such as the materials compounding and cooling water…For human operator that means repeatedly make valve adjustments to stabilize the quality. However It is really difficult to achieve high speed production while also maintaining the quality… 

With the NX-TC, the water-cooling output adjustment function suppresses the temperature variations to a minimum and raises the production capacity with the quality maintained

Videos

Downloads