Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

get direct access

Fill in your details below and get direct access to content on this page

Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

Download

G7S

Relays with forcibly guided contacts

The slim G7S-_-E relay family with forcibly guided contacts is available as a six-pole type in two different contact combinations. Terminals are arranged for easy PCB layout. It can be soldered directly to a PCB or used together with the P7SA sockets.

Forcibly guided contacts
Conforms to EN 50205
NO contacts: 10 A at 250 VAC and 10 A at 30 VDC, NC contacts: 6 A at 250 VAC and 6 A at 30 VDC (for resistive loads)
Reinforced insulation between inputs and outputs and poles
4- and 6-pole relays available

Compare all models CAD -kirjasto

Specifications & ordering info

Ordering information

Relays with forcibly guided contacts

Type	Sealing	Poles	Contacts	Rated voltage	Order code
Standard	Flux-tight	6 poles	4PST-NO, DPST-NC	24 VDC	G7S-4A2B-E
Standard	Flux-tight	6 poles	3PST-NO, 3PST-NC	24 VDC	G7S-3A3B-E

Sockets

Type		LED indicator	Rated voltage	Order code
Track-mounting	Track mounting and screw mounting possible	Yes	24 VDC	P7S-14F-END
Back-mounting	PCB terminals	No	-	P7S-14P-E

Specifications

Ratings

Coil

Rated voltage	Rated current (mA)1	Coil resistance (Ω)1	Max. voltage (V)2	Power consumption (W)
24 VDC	30	800	110%	Approx. 0.8

Contacts

Item		Resistive load
Rated load	NO contact	10 A at 250 VAC, 10 A at 30 VDC
Rated load	NC contact	6 A at 250 VAC, 6 A at 30 VDC
Rated carry current	NO contact	10 A
Rated carry current	NC contact	6 A

Item		Resistive load
Maximum switching voltage		250 VAC, 30 VDC
Maximum switching current	NO contact	10 A
Maximum switching current	NC contact	6 A

G7S-_-E Characteristics of Sockets

Model	P7S-14F-END	P7S-14P-E
Continuous current	10 A
Dielectric strength	2000 VAC for 1 min. between terminals
Insulation resistance	1000 MΩ min. 3
Ambient operating humidity	25 to 85%	5 to 85%

Characteristics

Contact resistance4		100 mΩ max.
Operating time5		50 ms max.
Release time2		50 ms max.
Maximum operating frequency	Mechanical	18,000 operations/h
	Rated load	1,800 operations/h
Insulation resistance		100 MΩ min.
Durability6	Mechanical	10,000,000 operations min. (at approx. 18,000 operations/h)
	Electrical	100,000 operations min. (at the rated load and approx. 1,800 operations/h)
Inductive load switching capability7 (IEC60947-5-1)	NO Contact	AC15 AC240V 5A, DC13 DC24V 2A
	NC Contact	AC15 AC240V 3A, DC13 DC24V 2A
Ambient operating temperature		-25 to 70°C (with no icing or condensation)
Ambient operating humidity		5% to 85%

Note: The values listed above are initial values.

Please check Omron in the Internet for updated information on product reliability data and the SISTEMA libraries: http://industrial.omron.eu/safety

1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of ±15%.

2. The maximum voltage is based on an ambient operating temperature of 23°C maximum.

3. Measurement conditions: Measurement of the same points as for the dielectric strength at 500 VDC.

4. Measurement conditions: 5 VDC, 10 mA, voltage drop method.

5. Measurement conditions: Rated voltage operation, ambient operating temperature: 23°C, contact bounce time is not included.

6. The durability is for an ambient temperature of 15 to 35°C and an ambient humidity of 25% to 75%.

7. AC15: cos φ = 0.3, DC13: L/R = 96-ms

1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of ±15%.

2. The maximum voltage is based on an ambient operating temperature of 23°C maximum.

3. Measurement conditions: Measurement of the same points as for the dielectric strength at 500 VDC.

4. Measurement conditions: 5 VDC, 10 mA, voltage drop method.

5. Measurement conditions: Rated voltage operation, ambient operating temperature: 23°C, contact bounce time is not included.

6. The durability is for an ambient temperature of 15 to 35°C and an ambient humidity of 25% to 75%.

7. AC15: cos φ = 0.3, DC13: L/R = 96-ms

How can we help you?

If you have a question or would like to ask for a quote, please contact us or send a request.

0207 464 200

Request quotation

Tarjous G7S

Tällä lomakkeella voit pyytää tarjouksen valitsemastasi tuotteesta. Täytäthän kaikki *-merkityt kentät. Henkilökohtaisia tietojasi käsitellään luottamuksellisesti.