Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

get direct access

Fill in your details below and get direct access to content on this page

Meillä on teknisiä ongelmia. Emme ole pystyneet vastaanottamaan lomakettasi. Pahoittelemme ja pyydämme yrittämään uudelleen myöhemmin.

Download

Z

Limit switch with basic plastic housing

The Z series of basic switches in plastic housing provide the same electrical and mechanical switching capability and lifetime as standard limit switches. But with the basic plastic housing the basic switches are an ideal solution with best value for money for uncritical environments or when separately encased in subassemblies.

Cost efficient basic plastic housing for subassemblies
Same electrical and mechanical switching ratings as standard limit switches

Compare all models CAD -kirjasto

Specifications & ordering info

Ordering information

Actuator type1		Order code2
Actuator type1		Solder terminal	Screw terminal
	Pin plunger	Z-15G	Z-15G-B
	Short spring plunger	Z-15GD	Z-15GD-B
	Leaf spring	Z-15GL	Z-15GL-B
	Reverse hinge lever	Z-15GM	Z-15GM-B
	Reverse hinge roller lever	Z-15GM2	Z-15GM2-B
	Plunger with M12 mounting	Z-15GQ	Z-15GQ-B
	Hinge lever	Z-15GW	Z-15GW-B
	Hinge roller lever	Z-15GW2	Z-15GW2-B

Specifications

Rated voltage	Non-inductive load				Inductive load
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC	15 A		3 A	1.5 A	15 A		5 A	2.5 A
250 VAC	15 A		2.5 A	1.25 A	15 A		3 A	1.5 A
8 VDC	15 A		3 A	1.5 A	15 A		5 A	2.5 A
14 VDC	15 A		3 A	1.5 A	10 A		5 A	2.5 A
30 VDC	6 A		3 A	1.5 A	5 A		5 A	2.5 A
125 VDC	0.5 A3		0.5 A	0.5 A	0.05 A		0.05 A	0.05 A

Durability	Mechanical	10,000,000 operations min.
Durability	Electrical	500,000 operations min.
Operating speed	Plunger	0.01 mm to 1 m/s
Operating frequency	Mechanical	240 operations/min
Operating frequency	Electrical	20 operations/min
Ambient temperature	Operating	-25 to 80°C (with no icing)
Degree of protection		IP00

Accessories

Terminal covers (protection of electrical contacts against accidental contact of e. g. fingers)

Type		Material	Order code
Type		Material	for soldering terminal models	for screw terminal models
	Cover with 5 thinner parts (plastic type) or holes (metal type) as cable exit positions. Protective cover is fixed to basic switch with mounting screws of basic switch.	plastic	AP-A	AP-B
		metal	AP1-A	AP1-B
	Cover with bottom cable exit	metal	AP-Z

1. Other actuator types are available. For the full range refer to the complete datasheet.

2. Contacts are directly accessible. Additional protective measures are required e.g. order covers from accessories.

3. For switching high currents at high voltages (e.g. 10A at 125VDC) contact your OMRON representative.

1. Other actuator types are available. For the full range refer to the complete datasheet.

2. Contacts are directly accessible. Additional protective measures are required e.g. order covers from accessories.

3. For switching high currents at high voltages (e.g. 10A at 125VDC) contact your OMRON representative.

How can we help you?

If you have a question or would like to ask for a quote, please contact us or send a request.

0207 464 200

Request quotation

Tarjous Z

Tällä lomakkeella voit pyytää tarjouksen valitsemastasi tuotteesta. Täytäthän kaikki *-merkityt kentät. Henkilökohtaisia tietojasi käsitellään luottamuksellisesti.